AEE WORLD

2019 Exhibitors

Select a company to learn more about their products, services and solutions.

 

2G Energy
Booth 413

2G provides a wide range of highly efficient, low emission cogeneration systems fueled by natural gas, biogas or propane. Our range of products are from 60 to 2,000 kW.  Combined heat and power (CHP) is an efficient and clean way of generating electric power and thermal energy from a single fuel source. The engine drives the generator, producing electricity, and the residual heat created during this process is recaptured and turned into useful heat. Our CHP systems power thousands of diverse applications worldwide. Visit our booth to find out more and to join the energy revolution!

Website

AB Energy
Booth 608

Founded in 1981 by Angelo Baronchelli, AB (www.gruppoab.com) is today the global benchmark for cogeneration, biogas and biomethane sectors. AB designs, manufactures, installs and services the best performing solutions on the world market; the entire production process takes place in our own factories in Orzinuovi (BS – Italy), that represent the world’s most important industrial centre in this field, on a site comprising approximately 40,000 square metres of interconnected buildings. Reliability and performance are guaranteed by a dedicated service, with more than 280 specialist technicians operating worldwide. Over 1,250 cogeneration plants have been installed to date, with a total nominal electrical power of more than 1,600 MW. In the past few years the company’s production capacity has quadrupled, with the number of employees increasing to 900.

AB Energy USA is the American subsidiary of AB – a company completely dedicated to cogeneration with over 1,250 installed plants and direct presence in 19 countries worldwide including Italy, Canada, Brazil, Mexico, UK, Germany and Russia. We build relationships with our clients and partners based on honesty and trust; we produce, install, and manage plants as if they were our own.

Website | Twitter | Facebook | LinkedIn

Abraxas Energy Consulting
Booth 612

Abraxas Energy Consulting was founded in October 2001 in the San Luis Obispo area of California by John Avina, Certified Energy Manager, Certified Commissioning Authority and Certified Measurement & Verification Professional. Abraxas offers the following services: • ASHRAE Level 1, 2, and 3 Energy Audits • Water Audits • Alternative/Renewable Energy Analysis and Feasibility Studies • Retro-Commissioning/Commissioning • Utility Bill Audits • Rate Analysis • Measurement and Verification • Utility Bill Tracking Services and Software Abraxas has Certified Energy Managers and Professional Engineers on staff, each with over 15 years of experience performing audits. In the past 4 years, Abraxas has provided services of over 40 million square feet and has found savings of over $11M. These audits covered retail, offices, hospitals, public housing, government and universities.

Website | LinkedIn

AC Kinetics
Booth 713

AC Kinetics is an engineering company located in Armonk, New York. The team consists of advanced engineers, who received their BS and PhD degrees at MIT. For more than 30 years, the team has developed and licensed technologies for machine vibration reduction. These technologies are used in hundreds of millions of machines worldwide.

AC Kinetics most recently developed a proprietary run time algorithm for AC induction motor control. This technology enhances energy efficiency, performance and reduces motor heat. The company and its strategic partner, Koch Industries, are currently field-testing the AC Kinetics AC induction motor control technology.

Website

Accuenergy
Booth 709

Accuenergy has an extensive product range that includes single & three phase multifunction power meters, multi-circuit meters, gateways and data acquisition servers, a variety of split core current transformers, UL listed CTs, Rogowski coil CTs, input/output and communication modules, converters, DC power meters, hall effect sensors, pre-wired panels, and data logging software.

The Accuenergy team will be demonstrating our product line including power meters, current transformers and other energy network solutions. Our technical & support team is ready to provide information on our product line to fit your project requirement, providing advice every step of the way from decision making, installation, to post-purchase and project strategizing.

Website | Twitter | Facebook | LinkedIn

Advanced Energy
Booth 426

Advanced Energy is a nonprofit energy firm. We work with electric utilities, government and a wide variety of public and private organizations in the residential, commercial and industrial, solar, motors and drives and electric vehicle markets. Our customized services include research, testing, training, consulting and program design.

Advanced Energy's exhibit will focus on our motor and drive services. Our team of motor and drive system engineers, combined with our internationally accredited test lab, provides a unique set of independent and unbiased services to governments, original equipment manufacturers, motor and drive manufacturers, utilities, distributors and motor service facilities. We are also pleased to offer motor service center auditing for EASA's Accreditation Program. We recognize the important role EASA and its members play in keeping motor driven systems running with expert service and advice. Our goal is to guide your service center through the Accreditation process with the same expert service and advice you provide your customers. Through our pre-audit guidance we can identify and resolve many potential concerns before traveling to your facility and work with you to help ensure a successful onsite audit. We are committed to making your audit process straightforward and informative.

Aegis Energy / EDF Group
Booth 512

Aegis Energy Services, LLC. is an innovative Combined Heat and Power (CHP) company based in Holyoke, MA. Founded in 1985, and with near 1,000 CHP installations, Aegis Energy Services' modular systems are currently utilized across the Northeast, Mid-Atlantic, and Western United States providing sustainable, clean power options for a wide array of industries. Recently merged with Dalkia (a subsidiary of EDF Group), Aegis has expanded its product and energy services capabilities.

Website | Facebook | LinkedIn

Airius
Booth 635

II. Airius destratification fans will significantly reduce “hot spots” and “cold spots” as well as energy consumption and utility costs due to heating, ventilating, and air conditioning (HVAC) in any existing facility. Further, these “too hot”, “too cold,” and “too costly” problems can be substantially avoided in new facilities or major renovations of existing facilities when HVAC designers coordinate use of our Airius fans within their conventional HVAC designs.

Solve comfort issues, increase productivity, save on HVAC energy costs and reduce your carbon footprint with an Air Pear fan system. Working in concert, each Air Pear delivers gentle efficient air circulation to balance overall air temperature from ceiling to floor and wall to wall. Available in various sizes to suit your building’s needs. EC motor option available across all sizes. Models on display.

Website | Twitter | Facebook | LinkedIn

Airxchange
Booth 406

Airxchange’s 35 years of extensive experience in manufacturing energy recovery ventilation products and components has culminated in designs having outstanding performance, reliability, and maintainability. Airxchange energy recovery technology provides a stable, robust product developed from the experience of more than 250,000 installations.

The company developed the only truly segmented polymer wheel in the market and has played a pioneering role in the development of standards and codes for energy recovery ventilation technology, remaining active in their ongoing development. Airxchange advanced technology with a modern structural design and lightweight polymer materials. Improved maintainability, greater reliability and an expanded range of applications are the results of this fresh approach. Today energy recovery ventilation is recognized as a mainstream technology in the HVAC industry, with Airxchange as the leader in the field.

We will be featuring our flagship product, the Energy Recovery Wheels. Airxchange Energy Recovery Wheels improve building HVAC system performance by efficiently preconditioning the outdoor air supply. With 30+ years of experience manufacturing energy recovery ventilation products and components, and an installed base of over 300,000 units, Airxchange has solidified itself as the leader in Energy Recovery Wheel technology. We will also be showcasing our cross-flow Energy Recovery Plates. Airxchange is proud to provide air-to-air heat exchangers to both the residential and commercial market. Airxchange Energy Recovery Plate (ERP) exchangers are manufactured using raw materials designed for optimal heat and moisture exchange within a total energy recovery ventilation device.

Website | Twitter | Facebook | LinkedIn

 

 

 

Allied Powers
Booth 717

ALTA  Enterprises
Booth 513

Alta has developed custom pool covers and pool cover reel systems for more than 400 universities and K-12 schools across North America. We customize all our pool covers for the location and use. We do custom university pool covers, public pool covers, health club pool covers, hotel pool covers and more. Alta automatic pool covers save time and energy.

Alta is the leading supplier of automatic swimming pool covers with push button functionality. Our automated, electric reel systems remove the hassle of deploying and retracting large pool covers. At the touch of a button, Alta’s automated, wall-mounted pool cover reels do all of the work – in less than two minutes.

Website

Auburn Manufacturing
Booth 424

Auburn Manufacturing Inc. is a leading developer, manufacturer and marketer of the most advanced, safest and high-quality flexible barriers against extreme-temperature challenges. AMI also helps industry save energy with our modularized thermal insulation blanket kits, a new concept in removable and reusable insulation blankets for insulating bare piping and components on steam and hot water distribution systems.

Ever Green Cut 'n Wrap Insulation Kits for Hot Water Systems - Each kit contains everything that's needed for quick and easy on-site fabrication of removable/reusable insulation blankets, providing low-cost alternative for insulating bare piping components on steam and hot water distribution systems. Ideal for insulating valves and fittings requiring maintenance and inspection. Ever Green Insulation Kits can help you save on GHG emissions & energy costs with a short payback!

Website

Capstone Turbine
Booth 504

CCBP Magazine
Media Sponsor | Booth 715

Chiller & Cooling Best Practices Magazine is a technical magazine dedicated to discovering Energy Savings in chiller and cooling systems. Our editorial focus is on case studies and technical articles where application and system knowledge drives technology selection, creating energy savings in projects delivering excellent ROI’s.

Website

Colmac WaterHeat
Booth 607

Colmac heat pump water heaters offer commercial and industrial users of sanitary hot water an energy efficient means of heating water to temperatures as high as 185°F (85°C) in a single pass. Designed for low maintenance and easy service, the Colmac WaterHeat heat pump water heaters have a life expectancy of 15+ years with some units having a life span of 25+ years. The Colmac WaterHeat single pass system delivers a constant leaving water temperature for continuous water heating whenever the unit is running. All Colmac WaterHeat heat pump water heaters are designed, built and tested in the USA.

Website | Facebook | LinkedIn

Compressed Air Challenge
Booth 726

Compressed Air Management & Compressed Air Consultants
Booth 401

Compressed Air Consultants (CAC) & Compressed Air Management (CAM) provide complete compressed air system optimization solutions. Since 1992, our solutions have included air assessments, system design and implementation, automation, and controls. Our clients include major US manufacturers, and our vendor-neutral approach ensures the best solution for our clients. Our focus is the positive economic impact of our solution on your project - productivity gains, operating cost reductions and capital avoidance. Learn more at www.camtechnologies.com and www.loweraircost.com.

Website

Crom
Booth 711

CROM is a specialist in the design and construction of prestressed concrete tanks and infrastructure restoration and repair. With over 65 years of experience, our continued success is driven by our self-performing skilled team with zero division of responsibility for our clients. CROM is built from a foundation of core values that is committed to safety, professional integrity, and high quality execution.

Website | Twitter | Facebook | LinkedIn

CWEEL
Booth 521

Daikin North America
Booth 411

Daikin Industries, Ltd. (DIL) is a Fortune 1000 company headquartered in Osaka, Japan with more than 70,000 employees and recognized the largest HVAC manufacturers worldwide. In late 2012 DIL completed the acquisition of Goodman Global Group, Inc. (Goodman), the leading manufacturer and distributor of residential unitary HVAC in the United States, for $3.7 billion to create Daikin North America LLC (DNA). DNA is the largest manufacturer of HVAC products in North America delivering high technology, environmentally-friendly and energy-intelligent HVAC solutions. Daikin furthered its commitment to operations in the U.S. with a $417M investment of Daikin Texas Technology Park, a state-of-the-art office, show-room, laboratory, manufacturing and logistics campus located near Houston, TX. As a total solution provider, Daikin a single source for commercial Packaged RTUs, Chillers, PTACs and Variable Refrigerant Volume (VRV) systems.

Daikin North America will be showcasing a complete lineup of commercial and residential HVAC solutions designed to reduce energy consumption through the use of a inverter-driven compressor, true zoning capability and precise refrigerant control.

Website | Facebook | LinkedIn

 

 

Distributed Energy
Media Sponsor | Booth 510

Distributed Energy remains the only publication in the country focused on the entire portfolio of power concerns for businesses and facilities, including onsite generation, HVAC, lighting and energy management systems. 

Website

DN Tanks
Booth 618

Electro Industries | Gauge Tech
Booth 722

The leader in Power Monitoring and Smart Grid Solutions

Electro Industries/GaugeTech, a worldwide leader in sub-metering and power monitoring, manufactures products that reliably track energy usage and identify inefficiencies, while offering the latest technology in remote monitoring and self-calibration.

We are exhibiting our Nexus and Shark Meters

Website

ElectroCell / BGA Energy Optimization Solutions
Booth 436

ElectroCell Systems prides itself on providing customers with the most reliable partner in our people, systems, and in all ongoing technical support. Our mission is to enhance the Chiller / Boiler operation by reducing energy and water usage for our customers. The exclusive ElectroCell system has been perfected by nearly two decades of R&D and is validated by over 100 field installations. Our success is built on 40 years experience as an energy management, building automation, and control system contractor with a focus on ElectroCell Systems since 1997.

Website | Facebook | LinkedIn

Emme Controls
Booth 417

EnergyCAP
Booth 718

EPA Energy Star
Bronze Sponsor | Booth 434

Website

Espen Technology
Booth 407

Espen Technology is dedicated to providing the most advanced linear LED lighting components. Espen has developed one of the largest lines of LED lamps, drivers, modules, emergency ballasts, and retrofit kits, for the Retrofit and OEM markets.

Website | Twitter | Facebook | LinkedIn

Global Energy Services
Booth 610

Global Energy Services, LLC (GES) is diversified with more than 25 years of experience and expertise in lighting retrofits, water conservation, and building envelope. As a woman-owned business, we are committed to transforming facilities across the U.S. into the most energy efficient enterprises possible. From professional-grade energy audits to intelligent energy solutions, we strive to bring Municipalities, Universities, Schools and Hospitals (MUSH), seamless value across all platforms.

Website 

GS Dunham
Booth 402

G.S. DUNHAM has been, and remains, the area’s leading innovator for steam heating systems, products and services. We are a manufacturer’s representatives for MEPCO (formerly Dunham Bush),VentRite®, the industry pioneers in the design and manufacture of steam and hydronic heating systems, and ELGE® High Efficiency Heat Exchangers.
G.S. DUNHAM combines state-of-the-art products from MEPCO, VentRite®, and ELGE® with expert service and support. As a fully authorized service and sales company, we thoroughly understand the inter-relatedness of engineered steam components. Our specialty is system efficiency and occupant comfort. We bring an electrical and electronic computer background along with over 100 years of experience to your building. Our latest controls offer internet based monitoring and control including all of the old familiar Vari-Vac® functions plus modern apartment temperature monitoring including data history reports.
Please contact our office: 718-886-4232

Website